Selling Price -
2008 Harley-Davidson® Sportster® 1200 Low
The 1200 Low offers all of the performance of a fuel-injected 1200cc Evolution™ V-Twin™, with pull-back handlebar and a low 26.3 seat height for comfortable ergonomics and a 4.5-gallon fuel tank for increased range. Black 13-spoke Cast Aluminum 19-inch front wheel is only available on this Sportster model.
- 2008
- Harley-Davidson®
- XL1200L Sportster® 1200 Low
- Base
- Cruiser
- Length 89.10 in. (2263.14 mm)
- Overall Width 35.20 in. (894.08 mm)
- Overall Height 46.80 in. (1188.72 mm)
- Ground Clearance 4.40 in. (111.76 mm)
- Wheelbase 59.70 in. (1516.38 mm)
- D401F 100/90-19 57H
- D401 150/80B16 71H
- 4.5 gal. (17.03 L) (warning light at approximately 1 gal.)
- (w/filter) 2.80 qts. (2.65 L)
- Transmission 5-speed Gear Ratios (overall): U.S. HDI JPN
- Engine Torque5 (per SAE J1349)
- 88.90 mm
- 96.82 mm
- Displacement 73.40 cu. in. (1200 cu. cm)
- Compression Ratio 9.7:1
- Dry-sump
- Primary Drive Chain, 57/38 ratio
- Final Drive Belt, 68/29 ratio
- Clutch 9-plate, wet
- Frame Mild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welde
- Front 19 in. x 2.15 in. (482.60 mm x 54.61 mm)
- Rear 16 in. x 3 in. (406.40 mm x 76.20 mm)
- Caliper Type Dual-piston front, single-piston rear
- Front 11.50 in. x .20 in. (292.10 mm x 5.08 mm)
- Rear 11.50 in. x .23 in. (292.10 mm x 5.84 mm)
- Front Wheel 4.12 in. (104.65 mm)
- Rear Wheel 2.12 in. (53.85 mm)
- (per Battery Council International Rating) Sealed, maintenance-free, 12V, 12-amp/hour, 200 cca
- Headlamp (quartz halogen) 55-watt low beam, 60-watt high beam
- Lights 8W/28W (5W/21W)
- Warranty8 24 months (unlimited mileage) Service Interval First 1,000 miles (1,600 km), every 5,000 miles (8,000 km) thereafter 1 Vehicles depicted may differ from vehicles manufactured and delivered.
- Florence, Alabama
- Pre-Owned
- 6969
- 2008
- Harley-Davidson®
- XL1200L - Sportster® 1200 Low
- Sportster®
- 1HD1CX3148K436969
- Engine Torque5 (per SAE J1349)
- 0
- Frame Mild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welde
- Transmission 5-speed Gear Ratios (overall): U.S. HDI JPN
- Available